Serving our customers with quality and safety first.
3
RIGHT-Hand
hexagon
0.094in. and 0.125in. ⁓1/8"
0.243in. and 0.251in. ⁓17/64"
unjc
56
0.086in. ⁓3/32"
chamfered
nut, plain, hexagon
cres type: 302 per ams 5688, ams 5636, ams 5637, or AMS-QQ-S-763; 303 per ams 5640, astm A581, or astm A582; 304 per ams 5647, ams 5639 or AMS-QQ-S-763, per astm A276, or AMS-QQ-S-763, 304l per astm A493, ams 5647 or AMS-QQ-S-763
phosphate nut
56
Right-hand
3
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
phosphate nut surface treated cres type: 302 per ams 5688, ams 5636, ams 5637, or ams-qq-s-763; 303 per ams 5640, astm A581, or astm A582; 304 per ams 5647, ams 5639 or ams-qq-s-763, per astm A276, or ams-qq-s-763, 304l per astm A493, ams 5647 or ams-qq-s-763 nut, plain, hexagon 56 thread quantity per inch right-hand 3 thread class
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)