Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.178in. and 0.193in. ⁓13/64"
0.423in. and 0.437in. ⁓7/16"
unc
20
0.250in. ⁓1/4"
chamfered
copper alloy 462 or copper alloy 464 or copper alloy 377
QQ-B-637 alloy 462 fed spec 1st material response or QQ-B-637 alloy 464 fed spec 2nd material response or QQ-B-626 comp 21 fed spec 3rd material response
silver
QQ-S-365 fed spec single treatment response
2 type and 13 style
Copper alloy 462 or copper alloy 464 or copper alloy 377
20
Right-hand
2b
Schedule B number: 7415290000
nmfc 093460
Copper screws, nuts, bolts, rivets, and other fasteners not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
silver surface treated 20 thread quantity per inch right-hand 2b thread class
1. | FF-N-836 | Cage 81348 |
2. | 836000-00 | Cage 32345 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)