Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.125in. and 0.142in. ⁓5/32"
0.059in.
3 drilled
1.296in. and 1.329in. ⁓1-11/32"
unef
18
1.125in. ⁓1-1/8"
configuration b
150.0 degrees both ends
chamfered
min one keyway through threads 0.135 in max wide and 0.045 in min deep
aluminum alloy 6061 or aluminum alloy 2017
QQ-A-200/8, T6 fed spec 1st material response or QQ-A-225/8, T6 fed spec 2nd material response or QQ-A-225/5, T4 fed spec 3rd material response
cadmium or cadmium and chromate or cadmium and phosphate
QQ-P-416 fed spec all treatment responses
1EA
Aluminum alloy 6061 or aluminum alloy 2017
18
Right-hand
2b
Schedule B number: 7616995095
nmfc 013540
Articles of aluminum nesoi
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium or cadmium surface treated min one keyway through threads 0.135 in max wide 18 thread quantity per inch right-hand 2b thread class
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)