Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
1.203in. ⁓1-13/64"
2.029in. ⁓2-1/32"
un
8
1.375in. ⁓1-3/8"
zzzx
steel
MIL-S-1222, type 2, symbol 4 mil spec single material response
material controlled iaw navsea 0948-LP-045-7010 material control standard for level i items
1EA
Steel
8
Right-hand
2b
Schedule B number: 7318160000
nmfc 093470
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
8 thread quantity per inch right-hand 2b thread class
1. | MS16286-13 | Cage 96906 |
2. | MIL-DTL-1222 | Cage 81349 |
3. | MS16286-13L1 | Cage 03950 |
4. | 1.37508UNC2BT3G4NSAFA | Cage 81349 |
5. | MILS1222TY3STYAGR4 1 3/8-8UN-2B | Cage 81349 |
6. | 1.37508UNC2BT3G4NSAFAL1 | Cage 03950 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)