Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.117in. and 0.130in. ⁓9/64"
0.3320in. and 0.3438in. ⁓11/32"
unc
32
0.164in. ⁓11/64"
flat
steel
zinc and dichromate
c group and 2 type and 1 style and a grade
Steel
32
Right-hand
2b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
zinc surface treated 32 thread quantity per inch right-hand 2b thread class
1. | FFN836GPCTYPE2STYLE1GRADEA | Cage 81348 |
2. | 1914534 | Cage 7X677 |
3. | 1918806 | Cage 7X677 |
4. | 6503 | Cage 0B6S1 |
5. | B5105G | Cage 31550 |
6. | 1914534 | Cage 16764 |
7. | 1918806 | Cage 16764 |
8. | 432229 | Cage 00000 |
9. | B5105G | Cage 28528 |
10. | 6503 | Cage 30874 |
11. | 1914534 | Cage 24617 |
12. | 1918806 | Cage 24617 |
13. | 1918806 | Cage 1LW55 |
14. | 1914534 | Cage 1LW55 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)