Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.587in. and 0.631in. ⁓41/64"
1.031in. and 1.063in. ⁓1-5/64"
875.0 deg fahrenheit and 1000.0 deg fahrenheit
unc
11
24.0 rockwell c and 38.0 rockwell c
0.625in. ⁓5/8"
washer faced
CONFIGURATION-Nut; TYPE-Iii; GRADE-7; CONDITION-Hardened and tempered
steel
3 type and 4 grade
1EA
Steel
11
Right-hand
2b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
configuration-nut; type-iii; grade-7; condition-hardened 11 thread quantity per inch right-hand 2b thread class
1. | MIL-DTL-1222 | Cage 81349 |
2. | MILS1222TABLE7SYMB0L4 5-8L1 | Cage 03950 |
3. | MILS1222 | Cage 81349 |
4. | M1222N3W10C20GGNN | Cage 81349 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)