Serving our customers with quality and safety first.
2b
unc
9
0.875in. ⁓7/8"
zzzw
material controlled iaw navsea 0948-LP-045-7010 material control standard for level i items
1EA
9
2b
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
9 thread quantity per inch 2b thread class
1. | 28877N ITEM 14 | Cage 35795 |
2. | MIL-DTL-1222,TYIII,GR7,STYAL1 | Cage 03950 |
3. | MIL-DTL-1222L1 | Cage 03950 |
4. | MIL-DTL-1222,TYIII,GR 7,STYA | Cage 81349 |
5. | 28877N ITEM 14L1 | Cage 03950 |
6. | 16-08-1633 | Cage 96169 |
7. | 7/8-9UNC-2B | Cage 81349 |
8. | ASTM-A194 GRADE 7 | Cage 81349 |
9. | MILS1222TABLE7SYMB0L4 7-8L1 | Cage 03950 |
10. | 16-08-1633L1 | Cage 03950 |
11. | MIL-DTL-1222,TYIII,GR 4,STYAL1 | Cage 03950 |
12. | TYIII,GR4,STYA,7/8-9UNC-2BL1 | Cage 03950 |
13. | MIL-DTL-1222,TYIII,GR 4,STY A | Cage 81349 |
14. | ASTM-A194 GRADE 7L1 | Cage 03950 |
15. | 7/8-9UNC-2BL1 | Cage 03950 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)