Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.562in. ⁓9/16"
0.546in. and 0.562in. ⁓9/16"
unc
18
0.312in. ⁓5/16"
chamfered or washer faced
steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 or steel comp 347
QQ-S-763 fed spec 1st material response or astm A582 assn std 2nd material response or QQ-S-763 fed spec 3rd material response or QQ-S-763 fed spec 4th material response or QQ-S-763 fed spec 5th material response or QQ-S-763 fed spec 6th material response
passivate
QQ-P-35 fed spec single treatment response
2 type and 11 style
as modified by height
1EA
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 or steel comp 347
18
Right-hand
2b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
passivate surface treated 18 thread quantity per inch right-hand 2b thread class
1. | T5994229PC13 | Cage 24446 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)