Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.109in. ⁓7/64"
0.312in. ⁓5/16"
unc
32
0.138in. ⁓9/64"
flat
copper alloy 836
2 type and 13 style
Copper alloy 836
32
Right-hand
2b
Schedule B number: 7415290000
Copper screws, nuts, bolts, rivets, and other fasteners not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
32 thread quantity per inch right-hand 2b thread class
1. | 113102 | Cage 7X677 |
2. | 90336 | Cage 08645 |
3. | SP14245 | Cage 10001 |
4. | 113102 | Cage 12204 |
5. | 113102 | Cage 18876 |
6. | R2639 | Cage 35311 |
7. | D11076-15-11 | Cage 91340 |
8. | D11076-15A11 | Cage 91340 |
9. | 218-14-04 | Cage 55268 |
10. | N16311C | Cage 56442 |
11. | 200024 | Cage 55268 |
12. | 24085 | Cage 72970 |
13. | 113102 | Cage 24617 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)