Serving our customers with quality and safety first.
3b
RIGHT-Hand
hexagon
0.359in. ⁓23/64"
0.969in. and 1.000in. ⁓1/64"
unc
11
0.625in. ⁓5/8"
chamfered or washer faced
copper alloy 462 or copper alloy 464 or copper alloy 482 or copper alloy 485
QQ-B-637 fed spec all material responses
4 type and a or b style
Copper alloy 462 or copper alloy 464 or copper alloy 482 or copper alloy 485
11
Right-hand
3b
Schedule B number: 7415290000
nmfc 093460
Copper screws, nuts, bolts, rivets, and other fasteners not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
11 thread quantity per inch right-hand 3b thread class
1. | MILB857TYPE4STYLEA0RB | Cage 81349 |
2. | 445-4510939M16 | Cage 51563 |
3. | SL7939PC1-5 | Cage 93232 |
4. | SL7940-1-5 | Cage 93232 |
5. | SL7939PC1-5 | Cage 0UBG9 |
6. | SL7940-1-5 | Cage 0UBG9 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)