Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.188in. ⁓13/64"
aircraft, (AC-130H, MC-130H, EC-130E, HC-130) ; engine, aircraft T-56; aircraft, orion P-3; engine, aircraft, T56-A-7/15 (C-130B/e/h/n/p) ; aircraft, hawkeye E-2C
1.500in. ⁓1-1/2"
unef
18
1.250in. ⁓1-1/4"
flat
aluminum alloy 2024
QQ-A-267 fed spec single material response
cadmium
Aluminum alloy 2024
18
Right-hand
2b
Schedule B number: 7616995095
nmfc 013540
Articles of aluminum nesoi
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on aircraft, (ac-130h, mc-130h, ec-130e, hc-130);engine, aircraft t-56;aircraft, orion p-3;engine, aircraft, t56-a-7/15 (c-130b/e/h/n/p);aircraft, hawkeye e-2c. cadmium surface treated 18 thread quantity per inch right-hand 2b thread class
1. | 178641 | Cage 32669 |
2. | 178641 | Cage 06848 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)