Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.402in. and 0.442in. ⁓29/64"
0.788in. and 0.813in. ⁓53/64"
unf
20
95.0 rockwell b and 32.0 rockwell c
0.500in. ⁓1/2"
chamfered
steel
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
2 type and 13 style and b grade
Steel
20
Right-hand
2b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium surface treated 20 thread quantity per inch right-hand 2b thread class
1. | K-500-CH-0169 | Cage 59556 |
2. | 408537 | Cage 77521 |
3. | FF-N-836 | Cage 81348 |
4. | MS35650-3392 | Cage 80205 |
5. | 84-002729 | Cage 92867 |
6. | 16-161 | Cage 21013 |
7. | MS35650-3392 | Cage 96906 |
8. | RVN5200-125 ITEM 3 | Cage 21013 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)