Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.615in. and 0.635in. ⁓41/64"
2.240in. and 2.260in. ⁓2-17/64"
un
16
1.750in. ⁓1-3/4"
flat
steel comp 1020
sae assn std single material response
1EA
Steel comp 1020
16
Right-hand
2b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
16 thread quantity per inch right-hand 2b thread class
1. | 1827K89 | Cage 78500 |
2. | 1827K89 | Cage 28158 |
3. | 261SQ12 | Cage 76040 |
4. | 12A7070 | Cage 95201 |
5. | 1827K89 | Cage 3D6E9 |
6. | 1827K89 | Cage 33323 |
7. | 450D1 | Cage 56442 |
8. | BB5178 | Cage 56442 |
9. | 1827K89 | Cage 72260 |
10. | 1827K89 | Cage 63734 |
11. | 73069 | Cage 95097 |
12. | 245435 | Cage 08683 |
13. | 364990 | Cage 65282 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)