Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.320in. and 0.337in. ⁓11/32"
0.045in. and 0.050in.
3 drilled
0.551in. and 0.562in. ⁓9/16"
unc
16
0.375in. ⁓3/8"
configuration b
chamfered
nut, hex, drilled, K-Monel
holes are drilled across 3 alternating corners, centered 0.050 - 0.070 inch from corner; marked "soc" on one flat edge per drawing
nickel alloy K-500
QQ-N-286, form 1/2 fed spec single material response
1EA
Nickel alloy k-500
16
Right-hand
2b
Schedule B number: 7508900000
nmfc 093470
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
holes are drilled across 3 alternating corners, centered 0.050 - 0.070 inch from corner; marked "soc" on one flat edge per drawing nut, hex, drilled, k-monel 16 thread quantity per inch right-hand 2b thread class
1. | 6394396-5 | Cage 31442 |
2. | 6394396-5 | Cage 53711 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)