Serving our customers with quality and safety first.
3b
RIGHT-Hand
hexagon
unc
10
0.750in. ⁓3/4"
flat
nickel alloy 400 or nickel alloy R-405
QQ-N-281 fed spec all material responses
1EA
Nickel alloy 400 or nickel alloy r-405
10
Right-hand
3b
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
10 thread quantity per inch right-hand 3b thread class
1. | 44-00-01 ITEM 2 | Cage 1CC97 |
2. | 203-4355176-9 | Cage 81994 |
3. | 203-5247321-8 | Cage 81994 |
4. | 245-5254745-8 | Cage 81994 |
5. | 831-0750-901 | Cage 10941 |
6. | 722-0148-000 PIECE 78 | Cage 04579 |
7. | 722-0148-000 PIECE 78 | Cage 10941 |
8. | 731-0750-901 | Cage 10941 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)