Serving our customers with quality and safety first.
2b
RIGHT-Hand
hexagon
0.312in. ⁓5/16"
0.250in. ⁓1/4"
unc
32
0.138in. ⁓9/64"
flat
steel comp 303
QQ-S-764, cond a fed spec single material response
passivate
MIL-F-14072, E300 mil spec single treatment response
1EA
Steel comp 303
32
Right-hand
2b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
passivate surface treated 32 thread quantity per inch right-hand 2b thread class
1. | NAS1786C06-5 | Cage D9182 |
2. | A4084 | Cage 99837 |
3. | 9083 | Cage 83330 |
4. | 2810012-104 | Cage 29436 |
5. | 8212SS0632-7 | Cage 1YGB8 |
6. | SS-6951-0632-0.312-01 | Cage 05791 |
7. | 1130H-SS-.312-12 | Cage 51506 |
8. | 2101-632-SS-20 | Cage 55566 |
9. | 8212SS0632-7 | Cage 06540 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)