Serving our customers with quality and safety first.
3b
RIGHT-Hand
hexagon
0.677in. and 0.697in. ⁓45/64"
2.484in. and 2.516in. ⁓2-33/64"
uns
12
1.750in. ⁓1-3/4"
chamfered
125.0 microinches
steel comp 1117 or steel comp 1118 or steel comp 1119
QQ-S-637 fed spec all material responses
cadmium
QQ-P-416, ty 3, cl 3 fed spec single treatment response
Steel comp 1117 or steel comp 1118 or steel comp 1119
12
Right-hand
3b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium surface treated 12 thread quantity per inch right-hand 3b thread class
1. | 1227D108 | Cage 78500 |
2. | 1227D108 | Cage 3D6E9 |
3. | 1227D108 | Cage 8E499 |
4. | BB25124 | Cage 56442 |
5. | 1227D108 | Cage 19107 |
6. | 1227D108 | Cage 59690 |
7. | 252305 | Cage 00006 |
8. | 325959 | Cage 65282 |
9. | 1227D108 | Cage 62265 |
10. | 7A5193 | Cage 62265 |
11. | 9F028A | Cage 62265 |
12. | 5310005146158 | Cage A00AM |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)