Serving our customers with quality and safety first.
zzzy
material controlled iaw SS800-AG-MAN-010/P9290 system certification procedures and criteria manual for deep submergence systems and requires cleaning, packing, and marking iaw MIL-STD-1622 or MIL-STD-1330 as deemed applicable; critical item for safety and survival of deep submergence research and rescue vehicals as differentiated by special test features
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
1. | 26-29XX-XXXXA020-023 | Cage 13669 |
2. | 7550478-26-29XX-XXXXA020-23 | Cage 53711 |
3. | G547-0002-26-29XX-XXXXA020-23 | Cage 96169 |
4. | 26-29XX-XXXXA020-023D0 | Cage 03950 |
5. | 4617-9D0 | Cage 03950 |
6. | 7550478-26-29XX-XXXXA020-23D0 | Cage 03950 |
7. | G547-0002-26-29XX-XXXXA020-23D0 | Cage 03950 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)