Serving our customers with quality and safety first.
3b
RIGHT-Hand
hexagon
0.250in. and 0.281in. ⁓9/32"
0.809in. and 0.816in. ⁓53/64"
unf
18
0.562in. ⁓9/16"
89.5 degrees nut and 90.5 degrees nut
chamfered or washer faced
steel
QQ-S-633-Canc fed spec single material response
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
1PG
Steel
18
Right-hand
3b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium surface treated 18 thread quantity per inch right-hand 3b thread class
1. | 8161450 | Cage 18876 |
2. | 946.29.94.005 | Cage S4080 |
3. | 254616 | Cage 56232 |
4. | 218330-6 | Cage 80020 |
5. | AS5178-06 | Cage 81343 |
6. | 591132PC6 | Cage 53711 |
7. | AN924-6 | Cage 88044 |
8. | AN924-6 | Cage 81352 |
9. | 5310002827817 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)