Serving our customers with quality and safety first.
3b
RIGHT-Hand
hexagon
1.130in. and 1.190in. ⁓1-13/64"
1.240in. and 1.260in. ⁓1-17/64"
unf
14
30.0 rockwell c and 37.0 rockwell c
0.875in. ⁓7/8"
washer faced
steel comp 1045
aisi assn std single material response
Steel comp 1045
14
Right-hand
3b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
14 thread quantity per inch right-hand 3b thread class
1. | 277605R1 | Cage 29510 |
2. | 277605R1 | Cage 0SAT8 |
3. | 277605R1 | Cage 92679 |
4. | 277605R1 | Cage 31007 |
5. | 277605R1 | Cage 31007 |
6. | 277605R1 | Cage 29510 |
7. | 277605R1 | Cage 0SAT8 |
8. | 277605R1 | Cage 92679 |
9. | 277605R1 | Cage 31007 |
10. | 277605R1 | Cage 29510 |
11. | 277605R1 | Cage 0SAT8 |
12. | 277605R1 | Cage 92679 |
13. | 277605R1 | Cage 31007 |
Nothing similar to this part number was found in our inventory
A nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)