Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 91890A039 specification
The minimum and maximum pitch diameter limits of a straight screw thread.
+6.6/+7.2 mm
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
cap
15.0 mm
The shortest straight line between flats,perpendicular to the height.
13.0 mm
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
iso m
A designation that is used for the purpose of general identification of the thread.
8.0 mm
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.25
Indicates the type of bearing surface.
flat or chamfered
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy
Answers.
1HD
Copper alloy
Right-hand
Schedule B number: 7415290000
nmfc 093486
Copper screws, nuts, bolts, rivets, and other fasteners not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-444-3412 NUT,PLAIN,CAP
right-hand
- NIIN
- 014443412
- NIIN Date
- 05/05/97
- Schedule B
- 7415290000
- Name Code
- 01855
- FIIG
- A021A0
- Item Weight
- 2.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $80.63 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Army
- - U.s. Marine Corps
- - Australia
Availability for 91890A039 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
91890A039 / Nut,plain,capWhat is the formal definition of this item?
An item internally threaded from one end, and completely inclosed on the opposite end. the outer periphery parallel to the threaded axis may be square, cylindrical, hexagonal, octagonal, or dodecagonal and taper to a cone or dome shape on the closed end. for like items which are stamped or formed from sheet stock, see nut (1), stamped. for similar items which are flat on top and bottom see nut (1), sleeve or post, electrical-mechanical equipment.
