Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1330H4KB271 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk reverse keyed
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.529in.
A measurement of the longest dimension of a key,in distinction from width.
0.089in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.089in. ⁓3/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
blind rivet w/smooth round shank
0.328in. and 0.332in.
A measurement of the longest dimension of the nut,in distinction from width.
1.110in. and 1.140in. ⁓1-9/64"
The area between the maximum and minimum thickness of material in which a specific blind rivet nut can be properly installed.
-0.211 to 0.271in.
Indicates the type of end included on the shank.
closed
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
250.0 deg fahrenheit
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unf
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
20.0 rockwell c
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
The included angle of the head countersink.
99.0 degrees and 101.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
nut, blind rivet - c'sunk head, internal thd, NON-Locking
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
ultimate thread strength at 6590 lbs min
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4037
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A752, uns G40370 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35, ty ii fed spec single treatment response
Answers.
1EA
Steel comp 4037
28
Flat countersunk reverse keyed
Right-hand
3b
Schedule B number: 7318160000
nmfc 093486
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-607-0190 NUT,PLAIN,BLIND RIVET
cadmium surface treated ultimate thread strength at 6590 lbs min nut, blind rivet - c'sunk head, internal thd, non-locking 28 thread quantity per inch flat countersunk reverse keyed head style right-hand 3b thread class
- NIIN
- 016070190
- NIIN Date
- 05/30/12
- Schedule B
- 7318160000
- Name Code
- 01873
- FIIG
- A021A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $81.88 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Army
Availability for NAS1330H4KB271 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other nuts with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1330H4KB271 / Nut,plain,blind rivetWhat is the formal definition of this item?
A metallic headed fastener having internal threads for a portion of the full length. it may have a smooth, hexagon or splined shank with an open or closed end. is designed to be expanded tightly against the material it is being installed in by means of a special tool. the item must have a specified grip range. the grip range is the thickness of the material the item is being installed in. see also nut (1) self-locking, blind rivet. excludes nut (1), sleeve.
