Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6145571 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the smallest dimension of the material,in distinction from length or width.
0.470in. and 0.480in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
strip
A measurement of the longest dimension of the nut,in distinction from width.
4.000in. ⁓4-1/64"
0.970in. and 1.000in.
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.
0.3125in. and 0.3130in.
Indicates the type and number of holes provided.
2 drilled
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unjf
The number of apertures included.
4
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
thd holes ctr 3.000 in. apart; drilled holes ctr 1.500 in. apart; 15.0 deg taper one end, both edges; corners rounded; 10.440 in. min, 10.560 in. max radius one side
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5643, cond H1025 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35, type 2 fed spec single treatment response
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
96906-MIL-STD-6866 standard (includes industry or association standards, individual manufactureer standards, etc.) .
Answers.
Steel comp 630
28
0.470 inches minimum and 0.480 inches maximum
Right-hand
3b
Schedule B number: 7318160000
Nuts of iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-01-315-2340 NUT STRIP
passivate surface treated thd holes ctr 3.000 in. apart; drilled holes ctr 1.500 in. apart; 15.0 deg taper one end, both edges; corners rounded; 10.440 in. min, 10.560 in. max radius one side 28 thread quantity per inch 0.470" material thickness right-hand 3b thread class
- NIIN
- 013152340
- NIIN Date
- 02/13/90
- Schedule B
- 7318160000
- Name Code
- 16009
- FIIG
- A021A0
- QUP
- Historical Price
- $2,045.33 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 6145571 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other nut strips with similar characteristics
Nothing similar to this part number was found in our inventory
6145571 / Nut stripWhat is the formal definition of this item?
A fastening device of rigid or semirigid material of various shapes and lengths having two or more apertures with lugs or prongs; threaded holes; or nuts. the apertures, threaded holes or nuts may be of any predetermined spacing.
