Serving our customers with quality and safety first.
0.384in. and 0.394in. ⁓13/32"
0.680in. and 0.695in.
0.035in.
steel
zinc
QQ-Z-325 ty 2, cl 3 fed spec single treatment response
flat external teeth
Flat external teeth
Steel
0.035 inches
0.680 inches minimum and 0.695 inches maximum
0.384 inches minimum and 0.394 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat external teeth zinc surface treated 0.035" material thickness 0.680" outside diameter 0.384" hole diameter
1. | X00226 | Cage 14351 |
2. | X00226 | Cage 14351 |
3. | X00226 | Cage 14351 |
4. | X00226 | Cage 14351 |
5. | X00226 | Cage 14351 |
6. | X00226 | Cage 14351 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces