Serving our customers with quality and safety first.
0.377in. and 0.385in. ⁓25/64"
0.671in.
0.091in. and 0.097in.
45.0 rockwell c and 53.0 rockwell c
both bearing surfaces serrated raised rib on both sides on inner and outer periphery
quenched and tempered
steel comp 1060 or steel comp 1211
astm A576 assn std 1st material response or 66 fed std 2nd material response
cadmium or zinc
QQ-P-416, ty 2, cl 3 fed spec 1st treatment response or QQ-Z-325, ty 2, cl 3 fed spec 2nd treatment response
split HELICAL-Right hand
Split helical-right hand
Steel comp 1060 or steel comp 1211
0.091 inches minimum and 0.097 inches maximum
0.671 inches maximum
0.377 inches minimum and 0.385 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand cadmium or zinc surface treated both bearing surfaces serrated raised rib on both sides on inner 0.091" material thickness 0.671" outside diameter 0.377" hole diameter
1. | 11648629-3 | Cage 19207 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces