Serving our customers with quality and safety first.
0.188in. ⁓13/64"
0.506in. and 0.533in.
0.125in.
82.5 rockwell superficial 15-n and 84.5 rockwell superficial 15-n
test and zzzy
steel comp 1060 or steel comp 1070 or steel comp 1078 or steel comp 1080
66 fed std all material responses
nickel and chromium
special quality control testing
split HELICAL-Right hand
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
as differentiated by material which must conform to ships parts control center special quality control provisions
1EA
Split helical-right hand
Steel comp 1060 or steel comp 1070 or steel comp 1078 or steel comp 1080
0.125 inches
0.506 inches minimum and 0.533 inches maximum
0.188 inches
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand nickel surface treated 0.125" material thickness 0.506" outside diameter 0.188" hole diameter
1. | P6644 | Cage 74965 |
2. | E246PC28 | Cage 74965 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces