Serving our customers with quality and safety first.
0.630in. and 0.646in. ⁓21/32"
1.000in. and 1.020in.
0.062in.
steel comp 410
cadmium and chromate
QQ-P-416, type 2, class 2 fed spec single treatment response
Steel comp 410
0.062 inches
1.000 inches minimum and 1.020 inches maximum
0.630 inches minimum and 0.646 inches maximum
Schedule B number: 7318210000
nmfc 095760
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
cadmium surface treated 0.062" material thickness 1.000" outside diameter 0.630" hole diameter
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces