Serving our customers with quality and safety first.
0.194in. and 0.202in. ⁓13/64"
0.337in.
0.047in.
steel comp 302
aisi national spec single material response
passivate
split HELICAL-Right hand
Split helical-right hand
Steel comp 302
0.047 inches
0.337 inches maximum
0.194 inches minimum and 0.202 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand passivate surface treated 0.047" material thickness 0.337" outside diameter 0.194" hole diameter
1. | 236-1002P7 | Cage 94144 |
2. | 236-1086P5 | Cage 94144 |
3. | MHLS10MS | Cage 99251 |
4. | 236-1002P7 | Cage 3B150 |
5. | 236-1086P5 | Cage 3B150 |
6. | 236-1002P7 | Cage 49956 |
7. | 236-1086P5 | Cage 49956 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces