Serving our customers with quality and safety first.
0.887in. and 0.905in. ⁓29/32"
1.296in.
0.234in.
nickel alloy K-500
QQ-N-286, class a fed spec single material response
split HELICAL-Right hand
as differentiated by material
1EA
Split helical-right hand
Nickel alloy k-500
0.234 inches
1.296 inches maximum
0.887 inches minimum and 0.905 inches maximum
Schedule B number: 7508900000
nmfc 093486
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand 0.234" material thickness 1.296" outside diameter 0.887" hole diameter
1. | 803-1197260 PC 110 | Cage 53711 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces