Serving our customers with quality and safety first.
0.168in. and 0.176in. ⁓3/16"
0.365in. and 0.381in.
0.018in. and 0.023in.
steel comp 1050 or steel comp 1053 or steel comp 1054 or steel comp 1055 or steel comp 1059 or steel comp 1060 or steel comp 1064
66 fed std all material responses
zinc
astm B633 assn std single treatment response
flat external teeth
1EA
Flat external teeth
Steel comp 1050 or steel comp 1053 or steel comp 1054 or steel comp 1055 or steel comp 1059 or steel comp 1060 or steel comp 1064
0.018 inches minimum and 0.023 inches maximum
0.365 inches minimum and 0.381 inches maximum
0.168 inches minimum and 0.176 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat external teeth zinc surface treated 0.018" material thickness 0.365" outside diameter 0.168" hole diameter
1. | 02380 | Cage 97520 |
2. | PL9 2559 00 100-63 | Cage 97520 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces