Serving our customers with quality and safety first.
0.141in. and 0.148in. ⁓5/32"
0.314in.
0.045in. and 0.051in.
steel comp 1060 or steel comp 1561 or steel comp 1064 or steel comp 1065 or steel comp 1566 or steel comp 1069 or steel comp 1070 or steel comp 1572 or steel comp 1074 or steel comp 1075 or steel comp 1078 or steel comp 1080
66 fed std all material responses
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
split HELICAL-Right hand
1HD
Split helical-right hand
Steel comp 1060 or steel comp 1561 or steel comp 1064 or steel comp 1065 or steel comp 1566 or steel comp 1069 or steel comp 1070 or steel comp 1572 or steel comp 1074 or steel comp 1075 or steel comp 1078 or steel comp 1080
0.045 inches minimum and 0.051 inches maximum
0.314 inches maximum
0.141 inches minimum and 0.148 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand cadmium surface treated 0.045" material thickness 0.314" outside diameter 0.141" hole diameter
1. | MS35339-22 | Cage D9182 |
2. | 10429 | Cage 82423 |
3. | 10421 | Cage 82423 |
4. | 852854 | Cage 19203 |
5. | 5310008393770 | Cage SCY13 |
6. | 12387302-41 | Cage 19207 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces