Serving our customers with quality and safety first.
0.572in. and 0.587in. ⁓19/32"
0.961in. and 0.971in.
0.141in. and 0.151in.
33.0 rockwell c and 40.0 rockwell c
cold drawn
copper alloy
QQ-N-286 class a fed spec single material response
split HELICAL-Right hand
g class
1EA
Split helical-right hand
Copper alloy
0.141 inches minimum and 0.151 inches maximum
0.961 inches minimum and 0.971 inches maximum
0.572 inches minimum and 0.587 inches maximum
Schedule B number: 7415210000
nmfc 139820
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand 0.141" material thickness 0.961" outside diameter 0.572" hole diameter
1. | FFW84 | Cage 81348 |
2. | 004-003005-006 | Cage 26916 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces