Serving our customers with quality and safety first.
0.383in. and 0.398in. ⁓13/32"
0.765in.
0.028in. and 0.034in.
80.0 degrees and 82.0 degrees
steel
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
countersink external teeth
1HD
Countersink external teeth
Steel
0.028 inches minimum and 0.034 inches maximum
0.765 inches
0.383 inches minimum and 0.398 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
countersink external teeth cadmium surface treated 0.028" material thickness 0.765" outside diameter 0.383" hole diameter
1. | 138617 | Cage 24617 |
2. | AN936C616 | Cage 88044 |
3. | PT1520 | Cage 78189 |
4. | MS35336-38 | Cage 96906 |
5. | 138617 | Cage 21450 |
6. | 5310-013-8617 | Cage SCY13 |
7. | 53101949213 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces