Serving our customers with quality and safety first.
0.318in. and 0.333in. ⁓11/32"
0.599in.
0.023in. and 0.028in.
85.0 rockwell b and 95.0 rockwell b
80.0 degrees and 82.0 degrees
copper alloy 510
QQ-B-750, hard fed spec single material response
countersink external teeth
4 type and 3 composition
Countersink external teeth
Copper alloy 510
0.023 inches minimum and 0.028 inches maximum
0.599 inches
0.318 inches minimum and 0.333 inches maximum
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
countersink external teeth 0.023" material thickness 0.599" outside diameter 0.318" hole diameter
1. | MS35336-60 | Cage 96906 |
2. | FF-W-100 | Cage 81348 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces