Serving our customers with quality and safety first.
0.448in. and 0.464in. ⁓15/32"
0.740in. and 0.760in.
0.032in. and 0.040in.
copper alloy 510 or copper alloy 524 or copper alloy 544 or tin alloy 425
QQ-B-750 fed spec 1st material response or QQ-B-750 fed spec 2nd material response or QQ-B-750 fed spec 3rd material response or cda assn std 4th material response
flat external teeth
2 type and 1 style and 3 composition or 4 composition
1EA
Flat external teeth
Copper alloy 510 or copper alloy 524 or copper alloy 544 or tin alloy 425
0.032 inches minimum and 0.040 inches maximum
0.740 inches minimum and 0.760 inches maximum
0.448 inches minimum and 0.464 inches maximum
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat external teeth 0.032" material thickness 0.740" outside diameter 0.448" hole diameter
1. | FF-W-100 | Cage 81348 |
2. | N413P43C13 | Cage 24446 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces