Serving our customers with quality and safety first.
0.375in. ⁓3/8"
0.692in.
0.036in.
copper alloy
tin
flat internal teeth
Flat internal teeth
Copper alloy
0.036 inches
0.692 inches
0.375 inches
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat internal teeth tin surface treated 0.036" material thickness 0.692" outside diameter 0.375" hole diameter
1. | AN936A616B | Cage 88044 |
2. | A18041-20 | Cage 27914 |
3. | 12Z3010-8 | Cage 94135 |
4. | 12Z3010-8 | Cage 10001 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces