Serving our customers with quality and safety first.
0.894in. and 0.927in. ⁓15/16"
1.364in. and 1.410in.
0.052in. and 0.060in.
40.0 rockwell c and 50.0 rockwell c
steel comp 410
66 fed std single material response
passivate
QQ-P-35, ty 2 or ty 3 fed spec single treatment response
flat internal teeth
2 composition and a grade and 1 style and 1 type
Flat internal teeth
Steel comp 410
0.052 inches minimum and 0.060 inches maximum
1.364 inches minimum and 1.410 inches maximum
0.894 inches minimum and 0.927 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat internal teeth passivate surface treated 0.052" material thickness 1.364" outside diameter 0.894" hole diameter
1. | FF-W-100 | Cage 81348 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces