Serving our customers with quality and safety first.
0.509in. and 0.523in. ⁓17/32"
0.873in.
0.125in.
wasp class lhd, aircraft, T-39; missile, tomahawk; support equipment, B-1 aircraft; engine, aircraft, F101-GE-102 (B-1) ; supply class aoe; support equipment, B-52 aircraft; guided missile system, ram EX43; ground power generator system (gpgs)
45.0 rockwell c and 53.0 rockwell c
steel comp 420
66 fed std single material response
passivate
QQ-P-35 fed spec single treatment response
split HELICAL-Right hand
Split helical-right hand
Steel comp 420
0.125 inches minimum
0.873 inches maximum
0.509 inches minimum and 0.523 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on wasp class lhd, aircraft, t-39;missile, tomahawk;support equipment, b-1 aircraft;engine, aircraft, f101-ge-102 (b-1);supply class aoe;support equipment, b-52 aircraft;guided missile system, ram ex43;ground power generator system (gpgs). split helical-right hand passivate surface treated 0.125" material thickness 0.873" outside diameter 0.509" hole diameter
1. | MS35338-162 | Cage 80205 |
2. | 145-4510955-59 | Cage 51563 |
3. | 004-003005-043 | Cage 26916 |
4. | MS35338-162 | Cage 96906 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces