Serving our customers with quality and safety first.
0.628in. and 0.641in. ⁓41/64"
1.073in.
0.156in.
2350-01-390-4683, recovery vehicle fu
steel comp 1059
SAEJ412, G10590 assn std single material response
zinc and chromate
ASTMB633, tyii, SC3 assn std single treatment response
split HELICAL-Right hand
1HD
Split helical-right hand
Steel comp 1059
0.156 inches
1.073 inches
0.628 inches minimum and 0.641 inches maximum
Schedule B number: 7318210000
nmfc 093486
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on 2350-01-390-4683, recovery vehicle fu. split helical-right hand zinc surface treated 0.156" material thickness 1.073" outside diameter 0.628" hole diameter
1. | ASME B.18.21.1 | Cage 80204 |
2. | AEW07625000GD8AA1 | Cage 80204 |
3. | W211NAA0062NN038NNCG1 | Cage 80204 |
4. | ASME B.18.21.1 | Cage 05047 |
5. | AEW07625000GD8AA1 | Cage 05047 |
6. | MS35338-50M | Cage 80205 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces