Serving our customers with quality and safety first.
0.141in. and 0.150in. ⁓5/32"
0.285in. and 0.300in.
0.016in. and 0.020in.
40.0 rockwell c and 50.0 rockwell c
80.0 degrees and 84.0 degrees
steel comp 1050 or steel comp 1551 or steel comp 1552 or steel comp 1053 or steel comp 1054 or steel comp 1055 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
countersink external teeth
Countersink external teeth
Steel comp 1050 or steel comp 1551 or steel comp 1552 or steel comp 1053 or steel comp 1054 or steel comp 1055 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064
0.016 inches minimum and 0.020 inches maximum
0.285 inches minimum and 0.300 inches maximum
0.141 inches minimum and 0.150 inches maximum
Schedule B number: 7318210000
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
countersink external teeth cadmium surface treated 0.016" material thickness 0.285" outside diameter 0.141" hole diameter
1. | 004-002451 | Cage 26916 |
2. | 1506 | Cage 78189 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces