Serving our customers with quality and safety first.
0.141in. and 0.151in. ⁓5/32"
0.239in.
0.025in. and 0.031in.
dyed deep yellow
copper alloy
cadmium and chromate
split HELICAL-Right hand
as modified by material spec
Split helical-right hand
Copper alloy
0.025 inches minimum and 0.031 inches maximum
0.239 inches
0.141 inches minimum and 0.151 inches maximum
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand cadmium surface treated dyed deep yellow 0.025" material thickness 0.239" outside diameter 0.141" hole diameter
1. | 12Z22PC273 | Cage 10001 |
2. | 900873-05 | Cage 03956 |
3. | 310-0078-000 | Cage 13499 |
4. | 900873-05 | Cage 90536 |
5. | 310-0078-000 | Cage 79807 |
6. | 6026-1085-6 | Cage 36378 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces