Serving our customers with quality and safety first.
0.255in. and 0.263in. ⁓17/64"
0.489in.
0.062in. and 0.072in.
90.0 rockwell b
copper alloy
QQ-B-750, comp a fed spec single material response
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
split HELICAL-Right hand
1HD
Split helical-right hand
Copper alloy
0.062 inches minimum and 0.072 inches maximum
0.489 inches maximum
0.255 inches minimum and 0.263 inches maximum
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand cadmium surface treated 0.062" material thickness 0.489" outside diameter 0.255" hole diameter
| 1. | AN935B416L | Cage D9182 |
| 2. | N0407P00041C11 | Cage D9182 |
| 3. | 2300+0931+001 | Cage 06032 |
| 4. | 804229 | Cage 19203 |
| 5. | 310-0082-00 | Cage D9182 |
| 6. | 310-0400-000 | Cage D9182 |
| 7. | 900873-09 | Cage 90536 |
| 8. | 209-4510945-44 | Cage 51563 |
| 9. | MS35338-101 | Cage 80205 |
| 10. | 310-0102-00 | Cage 13499 |
| 11. | 1390 PLAINADX | Cage 1VN02 |
| 12. | H410002-006 | Cage 14304 |
| 13. | MS35338-101 | Cage 96906 |
| 14. | 1390 PLAIN | Cage 73734 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces