Serving our customers with quality and safety first.
0.252in. and 0.260in. ⁓17/64"
0.487in.
0.109in.
4910-01-539-6129
washer, lock, regular helical spring
copper alloy 510
510, C51000 phosphor bronze 5% per asme B18.24-2004 national std/spec single material response
split HELICAL-Right hand
05047-asme B18.24-2004 professional/industrial association standard
Split helical-right hand
Copper alloy 510
0.109 inches
0.487 inches maximum
0.252 inches minimum and 0.260 inches maximum
Schedule B number: 7415210000
nmfc 194160
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on 4910-01-539-6129. split helical-right hand washer, lock, regular helical spring 0.109" material thickness 0.487" outside diameter 0.252" hole diameter
1. | 06A8165049 | Cage 5B5M3 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces