Serving our customers with quality and safety first.
0.204in. ⁓7/32"
0.381in.
0.018in. and 0.024in.
tactical water purification sys; twps 4610-01-488-9656
34.0 rockwell c
actual matl is 410 stainless steel
steel corrosion resisting
flat internal teeth
4920-01-511-0092
1HD
Flat internal teeth
Steel corrosion resisting
0.018 inches minimum and 0.024 inches maximum
0.381 inches
0.204 inches
Schedule B number: 7318210000
nmfc 194130
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on tactical water purification sys; twps 4610-01-488-9656. flat internal teeth actual matl is 410 stainless steel 0.018" material thickness 0.381" outside diameter 0.204" hole diameter
1. | ALH-100424-FIND 6 | Cage 318U8 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces