Serving our customers with quality and safety first.
0.375in. ⁓3/8"
0.500in.
0.022in.
steel
cadmium
QQ-P-416, ty 2, cl 3 fed spec single treatment response
flat internal teeth
Flat internal teeth
Steel
0.022 inches
0.500 inches
0.375 inches
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat internal teeth cadmium surface treated 0.022" material thickness 0.500" outside diameter 0.375" hole diameter
1. | 1220-02CSCADPL | Cage 78189 |
2. | 005201 | Cage 82199 |
3. | 105-424 | Cage 94285 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces