Serving our customers with quality and safety first.
0.103in. and 0.114in. ⁓1/8"
0.198in.
0.023in. and 0.027in.
nickel alloy a
QQ-N-286 fed spec single material response
split HELICAL-Right hand
Split helical-right hand
Nickel alloy a
0.023 inches minimum and 0.027 inches maximum
0.198 inches maximum
0.103 inches minimum and 0.114 inches maximum
Schedule B number: 7508900000
nmfc 194120
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand 0.023" material thickness 0.198" outside diameter 0.103" hole diameter
1. | FFW84A | Cage 81348 |
2. | 8515838 | Cage 18876 |
3. | G210869-2 | Cage 70408 |
4. | G210869-2 | Cage 64959 |
5. | G6425-145 | Cage 77569 |
6. | G6425-145 | Cage 82227 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces