Serving our customers with quality and safety first.
0.763in. and 0.791in. ⁓51/64"
1.009in.
0.188in.
steel comp 1060 or steel comp 1080
astm A576 assn std all material responses
zinc
split HELICAL-Right hand
a class and 2 style
as modified by outside dia.
1EA
Split helical-right hand
Steel comp 1060 or steel comp 1080
0.188 inches
1.009 inches maximum
0.763 inches minimum and 0.791 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand zinc surface treated 0.188" material thickness 1.009" outside diameter 0.763" hole diameter
1. | FFW84CLASSASTYLE2 | Cage 81348 |
2. | 273602-25 | Cage D9182 |
3. | 12-Z-3039-11 | Cage 10001 |
4. | 12Z22PC293 | Cage 10001 |
5. | 424400PC8 | Cage 10001 |
6. | 681948PC13 | Cage 10001 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces