Serving our customers with quality and safety first.
0.101in. and 0.107in. ⁓7/64"
0.188in.
0.020in.
steel corrosion resisting
passivate
split HELICAL-Right hand
Split helical-right hand
Steel corrosion resisting
0.020 inches
0.188 inches
0.101 inches minimum and 0.107 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
split helical-right hand passivate surface treated 0.020" material thickness 0.188" outside diameter 0.101" hole diameter
1. | WALS3 | Cage 62015 |
2. | 24-00044-004 | Cage 00724 |
3. | 7602608 | Cage 19207 |
4. | B2-6DIN127NRST | Cage D8385 |
5. | ZA236-1082P1 | Cage 3B150 |
6. | ZA236-1082P1 | Cage 49956 |
7. | 148495-1 | Cage 00752 |
8. | WALS3 | Cage 24655 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces