Serving our customers with quality and safety first.
0.141in. and 0.150in. ⁓5/32"
0.275in. and 0.295in.
0.017in. and 0.021in.
copper alloy
nickel
QQ-N-290, class 1, type 6 fed spec single treatment response
flat internal teeth
1 type and a grade and 1 style or 2 style and 3 composition
1PG
Flat internal teeth
Copper alloy
0.017 inches minimum and 0.021 inches maximum
0.275 inches minimum and 0.295 inches maximum
0.141 inches minimum and 0.150 inches maximum
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat internal teeth nickel surface treated 0.017" material thickness 0.275" outside diameter 0.141" hole diameter
1. | 6INIBNP | Cage 70318 |
2. | FFW100 | Cage 81348 |
3. | 1332ADX | Cage 1VN02 |
4. | 1332 | Cage 73734 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces