Serving our customers with quality and safety first.
0.377in. and 0.391in. ⁓13/32"
0.493in. and 0.507in.
0.022in.
copper alloy
external surfaces silver
silver
silver and chromate
QQ-S-365, type 1, 2, or 3, grade a fed spec all treatment responses
flat internal teeth
1EA
Flat internal teeth
Copper alloy
0.022 inches
0.493 inches minimum and 0.507 inches maximum
0.377 inches minimum and 0.391 inches maximum
Schedule B number: 7415210000
nmfc 194120
Copper washers including spring washers not threaded
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
flat internal teeth silver surface treated 0.022" material thickness 0.493" outside diameter 0.377" hole diameter
1. | 657-7 | Cage 94375 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces